Okuma OSP 5000, Электротехническое обслуживание, Учебное пособие

Страница: 63 / 286

4-14
Okuma America Corporation
Machining Center Machining Center
Machining Center Machining Center
Machining Center
Rev. 8-21-01
MDI
The following shows the functions available when the MDI mode key is pressed. All the functions
are the same as in AUTO except for the DATA INPUT (F1) function.
MANUAL
The following shows the functions available when the MANUAL mode key is pressed. All the
functions are the same as in DATA INPUT except F1 is blank.
DATA
INPUT ACTUAL
POSIT PART
PROGRAM
BLOCK
DATA SEARCH ATC/APC CHECK
DATA
EXTEND
F1 F2 F3 F4 F5 F6 F7 F8
Press this key
and then
enter desired
codes to
perform MDI
functions Used to
display
coordinates
of the actual
position of
the axes in
relation to the
zero offset
Used to
display a
part
program Used to
display the
data in one
BLOCK
DATA Used to
search for
particular
Check
Data
screen Used to
display the
status of
the ATC
or APC Used to
display
I/O signals
and
various
other data Used to
access
other
menus
ACTUAL
POSIT PART
PROGRAM
BLOCK
DATA SEARCH ATC/APC CHECK
DATA
EXTEND
F1 F2 F3 F4 F5 F6 F7 F8
Used to
display
coordinates
of the actual
position of
the axes in
relation to the
zero offset
Used to
display a
part
program Used to
display the
data in one
BLOCK
DATA Used to
search for
particular
Check
Data
screen Used to
display the
status of
the ATC
or APC Used to
display
I/O signals
and
various
other data Used to
access
other
menus
TOOL
SET PART
PROGRAM
BLOCK
DATA SEARCH ATC/APC CHECK
DATA
EXTEND
F1 F2 F3 F4 F5 F6 F7 F8