Okuma OSP 5000, Электротехническое обслуживание, Учебное пособие

Страница: 53 / 286

4-4
Okuma America Corporation
Lathe Lathe
Lathe Lathe
Lathe
Rev. 8-21-01
MDI
The following shows the functions available when the MDI mode key is pressed. All the func-
tions are the same as in AUTO except for the PROGRAM SELECT (F1) is DATA INPUT and
function F6 is blank.
DATA
INPUT ACTUAL
POSIT PART
PROGRAM
BLOCK
DATA CHECK
DATA
EXTEND
F1 F2 F3 F4 F5 F6 F7 F8
Press this key
and then
enter desired
codes to
perform MDI
functions Used to
display
coordinates
of the actual
position of
the axes in
relation to the
zero offset
Used to
display a
part
program Used to
display the
data in one
BLOCK
DATA Used to
display
I/O signals
and
various
other data Used to
access
other
menus
A
MANUAL
The following shows the functions available when the MANUAL mode key is pressed.
All the functions are the same as in DATA INPUT except F1 is blank.
ACTUAL
POSIT PART
PROGRAM
BLOCK
DATA CHECK
DATA
EXTEND
F1 F2 F3 F4 F5 F6 F7 F8
Used to
display
coordinates
of the actual
position of
the axes in
relation to the
zero offset
Used to
display a
part
program Used to
display the
data in one
BLOCK
DATA Used to
display
I/O signals
and
various
other data Used to
access
other
menus
A