15
18
Settings. Press here to access system options and settings
19
Home. To open the homepage
20
Product info. Press here to know generic info about H401-T-CONTROLLER and running time
Note 1
►
The H401-T-CONTROLLER allows to set different temperature set points for the two heating
devices. See paragraph 8.2.1.1 for more info.
Tip 1
►
The Touch Screen is pre-set with a set point Temperature of 37°C. Once turned on it will start
operating to reach this set-point value.
Note 2
►
Homepage will appear as in Figure 10(a) if the two heating devices are connected and as in
Figure 10(b), if only one device is connected.
a
b
Figure 10. Home Page. (a) Two devices connected; (b) One device connected.
Each rectangle reports the temperature set point of the device, its current temperature value and the
minimum (on the left) and maximum (on the right) temperature values reached within a defined time frame,
previously selected by the operator, as reported in paragraph 8.2.5.1.
A status indicator (colored dot) is reported on the left of the current temperature. In this example the
status indicator is green. The color of the status indicator changes according to the status of the controller. See
paragraph 8.1.2 for a description of the possible controller status and of the relative color assumed by the status
indicator.
8.1.1
How to enter the set point temperature
To input a new set-point temperature for a heating device, touch the corresponding tab, as indicated in
Figure 11 (a).
a
b
Figure 11. Definition of the set point. (a) Selection of the device; (b) Input of the set point value.
