background image

1

Dear Customer

Proficiency, innovation and quality combined. This is the tradition on which ÖkoFEN

shapes the future. We are very pleased that you too have decided to purchase a
product from ÖkoFEN.

This manual is intended to help you operate the product safely, properly and eco-
nomically.
 

Please read this manual right through and take note of the safety warnings.
 

Keep all documentation supplied with this unit in a safe place for future reference.
Please pass on the documentation to the new user if you decide to part with the
unit at a later date.

Please contact your authorised dealer if you have any questions.

ÖkoFEN attaches great importance to the development of new products. Our R&D
Department repeatedlychallenges the effectiveness of tried-and-tested systems and
works continuously on improvements. In thisway, we secure our technological advant-
age. We have already received many national and internationalawards for our prod-
ucts.

All our products comply with European standards in respect of quality, efficiency and
emissions.

1.1

Intended use

The FleXILO storage tank is designed for the storage of pellets for heating systems in
detached and semi-detached houses or commercial buildings. Use of the FleXILO
storage tank for other purposes is not permitted. No reasonably foreseeable forms of
misuse of the FleXILO storage tank are known.

The following Austrian standards, guidelines and specifications have been applied:

Standards

Designation

EN ISO 17225-2

Pellets for non-industrial use

4

1 Dear Customer

Installation manual

Содержание Flexilo

































Отзывы: