OKIDATA OF2200, Руководство по обслуживанию

Страница: 237 / 410

Page: 142
Service Guide OF2200/2400/2600
Chapter 3 Disassembly & Maintenance
3.2.24 Pressure Roller, Transfer Roller and Gear, Idle Gears, Cover Open Arm, and Reset Levers
CAUTION:
Do NOT touch the transfer roller! Touching the transfer roller may cause incomplete toner transfer,
resulting in faded output.
1. Perform procedure 3.2.23.
2. Press down and hold the pressure roller, while removing the left reset lever and the right reset lever,
remove the spring and cover open arm with the left reset lever.
3. Lift the pressure roller and remove it with the two springs and bushings.
4. Remove the eject roller gear.
5. Detach the hook on the gear side of the printer unit.
6. Lift the transfer roller from the gear side of the printer unit. Then, carefully remove the transfer roller
and transfer roller gear.
NOTE:
Lubrication
Lightly lubricate the channels of the reset levers, as necessary.
Refer to Module 3.5 of this Service
Handbook for lubrication details.
P/N 50406901 Roller: Pressure RSPL B.2.07
P/N 50805801 Lever: Reset (Left) RSPL
B.2.07
P/N 50805901 Lever: Reset (Right) RSPL B.2.07
P/N 50924201 Spring: Stacker Cover Reset RSPL B.2.07
P/N 50926401 Spring: Pressure Roller Bias B.2.07
P/N 51229001 Gear: Transfer Roller RSPL B.2.07
P/N 51229101 Gear: Fuser Roller Idle RSPL B.2.07
P/N 51229201 Gear: Eject Roller Idle RSPL B.2.07
P/N 51607402 Bearing RSPL B.2.06 , 07
P/N 51607601 Bushing: Pressure Roller RSPL B.2.07
P/N 53068901 Arm: Cover Open RSPL B.2.07
P/N 53342601 Roller: Transfer RSPL B.2.07