OKIDATA OF2200, Руководство по обслуживанию

Страница: 163 / 410

Page: 107
Service Guide OF2200/2400/2600
Chapter 2 Failure Analysis
List of Technical Functions - Okifax 2200
Name Purpose Default
01 Line Monitor Control Selects the monitoring range. <R> ON Off-Hook to
DCN<R>OFF: Off-Hook to DIS OFF
02 Automatic Protocol
Dump Select Reports handshaking and protocol data for each
communication OFF
03 Automatic MCF Enables automatic printout of the Message
Confirmation Report upon detecting a
communication error ON
04 TSI Print Selects the printing of TSI data from the sending
FAX on the received picture. TSI is printed at the
leading edge of the first page only. ON
05 Reverse Polling Selects the reverse poll function<R> OFF
06 Continuous Polling Placing a document on the ADF tray selects the
polling mode without operating the SELECT
FUNCTION Key.<R>Allows continuous loop RX
poll of auto-dial group. OFF
07 MH Only Limits image compression to Modified Huffman
Code only.<R> OFF
08 Shorten Protocol Shortens protocol to save transmission time.<R> ON
09 Call-Back Message Enables sending a voice callback request when
the remote station does not respond to a Voice
Request. ON
10 Personal ID Enables the transmission of the upper 16
characters of the sender ID as the Personal ID.
The Personal ID will appear on the remote
station's display and on the remote station's
Activity Report. ON
11 Relay Broadcast
Initiate Enables/disables Relay Broadcast Function
prompts. ON
12 Confidential TX Enables the Confidential TX Function. ON
13 H-Modem Rate Selects the modem's starting speed: 9600 or
4800 bps. 9600