manualshive.com logo in svg

OKIDATA ML1120, Руководство по обслуживанию

Поделиться
Скачать
OKIDATA ML1120 Скачать руководство пользователя страница 73

43471801TH  Rev.1

73 /

Oki  Data  CONFIDENTIAL

•  Print result is faint.

•  The ink ribbon is not fed properly or is not sent at all.

Is the ribbon being fed properly during a print job?

N: Remove the ribbon cartridge and check if the ribbon feed mechanism is operating

properly.

N: Replace the ribbon feed gear assembly.

Y: Replace the ribbon cartridge.

Y: Has the ink ribbon reached its life?

Y: Replace the ribbon cartridge.

N: Is the head gap set at the regulated value?

N: Readjust the head gap.

Y: Replace the print head.

9

0

Line is not fed upon receiving/printing data.

Is the LF motor cord connected properly?

N: Connect the cord properly.

Y: Turn OFF the power, remove the LF motor connector, and confirm that the

resistance between pins 1-2 and 3-4 of the LF motor connector (LFMOT) is

approximately 12.1

Ω±

10%.

N: Replace the LF motor.

Y: Replace the L09 print circuit board.

Содержание ML1120




















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды