manualshive.com logo in svg

OKIDATA ML1120, Руководство по обслуживанию

Поделиться
Скачать
OKIDATA ML1120 Скачать руководство пользователя страница 66

43471801TH  Rev.1

66 /

Oki  Data  CONFIDENTIAL

6.

TROUBLESHOOTING AND REPAIR

6.1

Items to Check Before Repair

(1)

Check the inspection items specified in the instruction manual.

(2)

Find out as many details of the trouble as possible from the customer.

(3)

Inspect in the conditions as close as possible to those at the time the trouble occurred.

(4)

Proceed with the repair as follows:

Check the trouble status according to Table 6.1 for the details of the trouble. Then, locate
the trouble position according to the detailed flowchart.

(5)

Carry out a thorough test after the repair to check for correct functioning.

   • Allocation of switch lamps

A

B

C

D

1

1

1

1

1

2

2

2

2

2

3

3

3

3

3

4

4

4

4

4

   • Indicator Light Functions

SEL

ALARM

STATUS 1

STATUS 2

Green

Red

Green

Green

• Indicates SELECT (ready to

receive) status.

• Indicates power saving

status (lit dim).

• Indicates paper end status.

• Indicates the font, character

pitch, and print mode.

• Indicates the font, character

pitch, and print mode.

• Indicates DESELECT state

(not ready to receive).

• Indicates existence of no

alarms.

• Indicates the font, character

pitch, and print mode.

• Indicates the font, character

pitch, and print mode.

• Flashes with ALARM LED

and indicates unrecoverable
status alarm. (Both main
and sub flashes)

• Indicates print suppression

status.

• Indicates head thermal

alarm (quiescent) status.

• Flashes with SEL LED and

indicates unrecoverable
status alarm. (Main flash)

• Indicates paper jam status.
• Indicates media alarm status.

• Indicates the font, character

pitch, and print mode.

• IIndicates the font, character

pitch, and print mode.

LED

Color

Stays lit

Stays off

Flashes

Содержание ML1120




















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды