OKIDATA MICROLINE ML590, Руководство по обслуживанию

Страница: 5 / 305

Table of Contents Page
........Continuous Paper Feed (Push/Pull Tractor Mechanism) 84
....2.2.06 Paper Detection Mechanism 85
....2.2.07 Support Protector Mechanism 86
....2.2.08 Automatic Paper Load 87
....2.2.09 Paper Park 88
3 Maintenance & Disassembly
....3.1.01 General Information 89
....3.1.02 Maintenance Tools 90
....3.1.03 Maintenance Precautions 91
3.2 Disassembly/Assembly Procedures 92
....3.2.01 Preliminary Items 93
....3.2.02 Printhead Assembly 94
....3.2.03 Ribbon Protector 95
....3.2.04 Gear Case Assembly 96
....3.2.05 Pull-up Roller Assembly 97
....3.2.06 Upper Cover, Access Cover, and Sheet Guide
Assemblies 98
....3.2.07 Control Board (AKGI) 99
....3.2.08 Power Supply Assembly 100
....3.2.09 Operator Panel PCB (LEOP) 101
....3.2.10 PC Connector 102
....3.2.11 Space Motor and Roller Guide Assemblies 103
....3.2.12 Carriage Cable 104
....3.2.13 Space Rack 105
....3.2.14 Roller/Holder Backup Assembly 106
....3.2.15 Guide Rail and Adjust Cam 107
....3.2.16 Left Ground Plate 108
....3.2.17 Right Ground Plate 109
....3.2.18 Rear and Cut Sheet Paper Feed Sensor Levers 110
....3.2.19 Platen Assembly 111
....3.2.20 Paper Chute Assembly 112
....3.2.21 Line Feed Motor Assembly 113
....3.2.22 Reset Spring 114
....3.2.23 Idle Gear and Change Lever 115
....3.2.24 Pressure Spring 116
....3.2.25 Carriage Shaft 117
....3.2.26 Leaf Spring 118
....3.2.27 Bottom Paper Sensor Levers 119
....3.2.28 Front Pressure Roller Assembly 120
....3.2.29 Tractor Assembly 121
....3.2.30 Main Frame 122
3.3 Printer Adjustments 123
....3.3.02 Printhead Gap Adjustment 124
....3.3.03 Key Combinations 125