Page: 104
Service Guide ML590/ML591
Chapter 3 Maintenance & Disassembly
3.2.12 Carriage Cable
1. Perform these procedures:
3.2.01
3.2.06
3.2.07
3.2.11
2. Slightly bow the carriage cable (1) to release it from the claws (2) and the projection on the
main frame (3).
3. Remove the carriage cable.
NOTE:
Installation
The contacts on the cable face up when the cable is positioned on the main frame.
The cable end with the 45° angled contacts connects to the gear case assembly.
DO NOT sharply bend the carriage cable. You will slightly bow the cable to position it under the
claws and over the projection.
P/N 56627301 Cable: Carriage (Narrow)
RSPL
590
B.2.06
