7. Press
GROUP
until the desired Group prints (Rear Feed or Bottom Feed).
8. Press
ITEM
until the desired Item prints (Form Tear Off)
9. Press
SET
until the desired setting prints (Off, 500 mS, 1 sec, 2 sec).
10. Press
EXIT
to save the change and exit Menu Mode.
Using
1. Load paper.
2. Press
FORM FEED.
3. The paper will advance past the start print position (Top of Form) to the tear bar position.
4. The paper says in this position until the printer receives data. Then, the paper will be retracted
to the appropriate Top of Form position.
5. A few seconds after printing stops, the paper advances to the tear bar position.
Checking Top of Form with Form Tear Off Activated
1. Load paper.
2. Press and hold
TEAR.
When you release
TEAR,
the paper will return to the tear off position.
3. The paper will retract to the Top of Form position.
4. Release
TEAR.
5. The paper advances to the tear bar position.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
