manualshive.com logo in svg

OKIDATA Microline 395, Руководство по обслуживанию

Поделиться
Скачать
OKIDATA Microline 395 Скачать руководство пользователя страница 93

%3.3.06 Top of Form

                                                                                                                                                
3.3.06 Top of Form
General Information
Top of form is the place on the page where printing begins.
When the printer advances paper to the next page, it stops at the top of form.
The Microline 395 and 395C printers store the top of form independently for the three standard paper 
feed paths.
Top
Rear
Bottom
Each top of form is set using the same procedure.
Procedure
1. Select the desired paper path.
2. Load paper into the printer by pressing FORM FEED.
3. Press SELECT until the printer is OFF-LINE. (SELECT will NOT be lit).
4. The red line on the plastic ribbon protector indicates the base of the printing line. Use this red line as a 
guide.
5. Press and hold PARK while pressing one of the two microfeed switches (up or down arrow).
UP advances the paper. The space used for the Top of Form increases.
DOWN retracts the paper. The space used for the Top of Form decreases.
6. Release PARK.
7. Press SELECT and place the printer ON-LINE. (SELECT will be lit).
Reset to Factory Defaults
1. Power OFF the printer.
2. Press and hold LINE FEED and QUIET while powering ON the printer.
3. The Top of Form is reset to factory defaults.
                                                                                                                                                

ML395 ( 96-02-03 )

Содержание Microline 395



















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды