manualshive.com logo in svg

OKIDATA Microline 395, Руководство по обслуживанию

Поделиться
Скачать
OKIDATA Microline 395 Скачать руководство пользователя страница 83

%3.3.03 Color Adjustment (Microline 395C Printer)

                                                                                                                                                
3.3.03 Color Adjustment (Microline 395C Printer)
Ribbon Home Adjustment
1. Detach the upper cover assembly (3.2.04).
2. Remove the printer mechanism (3.2.08).
3. Rotate the ribbon shift cam (1) so the ribbon guide (2) is at the top of the post (3).
4. The gap from the end face of the ribbon sensor (4) to the shift cam lever (5) must be .020".
5. If adjustment is necessary, loosen the shift cam lever mounting screw (6) and position the lever to 
obtain the desired clearance.
6. Check that the ribbon guide remained at the top of the post. If it moved, repeat the procedure.

                                                                                                                                                

ML395 ( 96-02-03 )

Содержание Microline 395



















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды