manualshive.com logo in svg

OKIDATA Microline 395, Руководство по обслуживанию

Поделиться
Скачать
OKIDATA Microline 395 Скачать руководство пользователя страница 77

%3.2.35 Drive Pulley and Mini-pitch Belt

                                                                                                                                                
3.2.35 Drive Pulley and Mini-pitch Belt
1. Remove the printer unit (3.2.30).
2. Remove the bottom push mechanism (3.2.34 - Steps 2, 3, 4, 5).
3. Detach the lock/flange (1) of the drive pulley (2).
4. Remove the mini-pitch belt (3).
5. Remove the drive pulley.
NOTE:
If you are only removing the mini-pitch belt, it is not necessary to remove the drive pulley.
P/N 51228801 Pulley: Drive (BTF) (ML395) Option RSPL B.2.15
P/N 54111291 Belt: Mini Pitch (125 teeth) Option RSPL B.2.15

                                                                                                                                                

ML395 ( 96-02-03 )

Содержание Microline 395



















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды