manualshive.com logo in svg

OKIDATA Microline 395, Руководство по обслуживанию

Поделиться
Скачать
OKIDATA Microline 395 Скачать руководство пользователя страница 48

%3.2.09 Platen Assembly

                                                                                                                                                
3.2.09 Platen Assembly
1. Remove the upper cover assembly (3.2.04).
2. Loosen the three 7 mm line feed motor mounting bolts (1).
3. Move the line feed motor (2) closer to the platen (3) and detach the line feed drive belt (4).
4. Remove the E-ring, washer, spring and idle gear (5).
5. Remove the screw and detach the gear pulley, washer and bushing (6).
6. Remove the screw and detach the gear and bushing (7).
7. Push in the platen lever (8), lift the bail, and remove the platen assembly.
NOTE:
Perform the line feed belt tension adjustment (3.3.02) after replacing the line feed drive belt.
P/N 50215902 Separator: Sheet RSPL B.2.02
P/N 50054101 Platen Assembly RSPL B.2.06, 09
P/N 51214501 Gear: Platen "A" RSPL B.2.06, 09
P/N 51215001 Pulley: Platen RSPL B.2.06, 09
P/N 51302790 Belt: Mini Pitch (Line Feed) RSPL B.2.06, 09

                                                                                                                                                

ML395 ( 96-02-03 )

Содержание Microline 395



















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды