132
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
T
Setup Items in PDL Settings Menu
Pen Parameters (only with HP-GL and D-SCAN)
Pen parameters specify the Printer's drawing pen conditions, e.g., thickness (line
width), and density.
HP-GL: 00 to 15
D-SCAN: 01 to 32
n
Pen Settings
z
Pen Parameter Mode
The parameter selects the data setting or touchpanel setting tospecify the pen
attribute.
<Parameter by selecting options>
n
: Default value
n
Data Setting
Enables the data setting for the pen attributes.
Panel Setting
Enables the touchpanel setting for the pen attributes.
z
Fine Pen-Width Adjustment
The parameter adjusts the pen width value. The pen width specified with data or
touchpanel setting is increased or decreased by the adjustment value.
Note that the maximum pen width is 16 mm (0.63 inches), and the minimum is 1 dot.
<Parameter by selecting options>
-0.99 to +0.99
Default value = 0
z
Micro-Vector Rounding
The parameter specifies the shape of the micro-vector's line ends and line joins.
<Parameter by selecting options>
n
: Default value
n
Off
Line end is specified by the Line End parameter, and Line
join is specified by the Line Join parameter.
On
Performs rounding for all micro-vectors.
z
With the Printer, micro-vector is defined as follows:
- The line width and line length are 1 mm or less.
