116
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
T
Setup Items in PDL Settings Menu
Drawing Parameters
Drawing parameters specify the print conditions.
n
Parameter Mode (only with D-SCAN)
When a parameter is selected with both data and touchpanel, the parameter mode
specifies the parameter priority.
<Parameter by selecting options>
n
: Default value
n
Data Setting
The parameter specified with data is validated.
Panel Setting
The parameter specified with touchpanel is validated.
n
Offset Mode
The offset mode selects Same Drawing Size with Top and Bottom Blank, Offset
with Paper Size Change, or Offset without Paper Size Change as the offset
function.
<Parameter by selecting options>
n
: Default value
n
Same Drawing Size with
Top and Bottom Blank
The parameter selects the same drawing size with the top
and bottom blank as the offset function. The
Same Drawing
Size with Top and Bottom Blank
setting is enabled.
Offset with
Paper Size Change
The parameter selects the X offset and Y offset as the offset
function. The X Offset and Y Offset settings are enabled. The
page size is increased or decreased by the offset amount.
Offset without
Paper Size Change
The parameter selects the X offset and Y offset as the offset
function. The X Offset and Y Offset settings are enabled. Note
that the offset function does not affect the printed image
size. As a result, the printed image may be clipped. When
the printed image size is not specified, the Printer prints the
image in the Offset with Paper Size Change mode.
n
Same Drawing Size with Top and Bottom Blank
The parameter specifies the blank space size to add around a printed image at the
same size as the original. Note that the parameter is valid only when the offset
mode is set to Same Drawing Size with Top and Bottom Blank.
<Parameter by entering numbers>
0 to 100
Default value = 0, Unit in mm
