Set RS232 Parameters
Command Structure
<ESC>CRaaaaa,b,c,d
aaaaa
=
Baud
rate
(9600, 19200 or 38400)
b
=
Parity (N for
N
one, O for
O
dd, E for
E
ven)
c =
Number
of
data
bits
(7
or
8)
d
=
Number
of
stop
bits
(1
or
2)
Example:
<ESC>CR9600,N,8,1
Placement: Must be sent in a separate data stream.
Default:
9600,N,8,1
Command Function
To select the desired RS232 communication settings.
Input to Printer
<ESC>A
<ESC>CR9600,N,8,1
<ESC>Z
Printer Output
There is no printer output as a result of this command.
Special Notes
1.
Any commands sent to the printer over the RS232 port within two
seconds of receiving the command may be lost.
2.
The RS232 settings must match those of the host system. If the RS232
settings
are
unknown,
printing
a
Self Test label will list the current
settings.
94
