Special Notes
1.
Use of this command will set the Vertical/Horizontal Offset setting of
the printer configuration until a new Base Reference Point command is
issued.
2.
This command may be used more than once in a print job.
3.
An alternative to using this command is to make changes to your current
Horizontal/Vertical
Position
commands.
Example:
Let’s say the current base reference point is H=1, V=1 and you wish to move
all the fields on your label downward vertically by 150 dots. You could either
(1) add the Base Reference Point command or (2) change all the vertical posi-
tion commands by an additional 150 dots.
4.
For a more detailed example of the Base Reference Point command, see “Print
Area”
in
this
section.
5.
The OKIPOS X400 printers will not “wrap” (i.e. If any part of a character or image
extends beyond the last print dot position. It will disappear and not be visible
on
any
part
of
the
label).
21
