manualshive.com logo in svg

Oki OKIFAX 5700, Руководство по обслуживанию, Страница: 194 / 472

Поделиться
Скачать
Oki OKIFAX 5700 Скачать руководство пользователя страница 194

OKIFAX 5700/5900

2 - 104

No.

Item

Specifications

Display the subnet address from the NIC, check the data
from the terminal, and change the setting.

1) Setting values

32 bits are divided into four 8-bit decimal values for
setting.
The decimal values are separated by dots as shown
below.
[207.255.255.0  ]

* If a LAN option is installed, this setting cannot be

made when an HSP error has occurred.

* This setting cannot be made when not supported

by NIC card.

Display the gateway address from the NIC, check the
data from the terminal, and change the setting (NIC
option setting).

1) Setting values

32 bits are divided into four 8-bit decimal values for
setting.
The decimal values are separated by dots as shown
below.
[206.181.233.2  ]

* If a LAN option is installed, this setting cannot be

made when an HSP error has occurred.

* This setting cannot be made when not supported

by NIC card.

84

Subnet Mask

85

Default Gateway

Note: Setting values are defined for each default type

The settings listed below can be made only when a LAN option is installed.  When it is not
installed, none of LAN-related setup items can be selected.  None of them can be selected
during NIC initialization.

Table 2.9.5.7  LAN Options  (2/2)

Содержание OKIFAX 5700

























































































































































































































































































































































































































































































Отзывы:

Нет отзывов