2.8.4 Color Registration Adjustment Test
The color registration adjustment test is used for adjusting color registration or
investigating the causes of color misregistration.
1.
Enter the self-diagnostic mode and, until the following message appears, press
[2]
or
[8]
.
2.
Press the
[6]
button and the following message appears. Press
[2]
or
[8]
until a
target option appears.
3.
Press the OK button, and the displayed test option is performed.
When
REG ADJ EXECUTE
is executed:
a.
A color registration adjustment test starts (the ONLINE lamp starts
blinking).
b.
When the test ends, the upper display shows the result of the test (OK or
an error name), and the lower display shows ****RESULT.
Pressing
[2]
displays the next test result. Pressing the
[8]
displays the preceding
test result. Pressing
[4]
restores the state for step 2.
Remark:
While the printer is initialized or issues an alarm or the cover is open, it
displays the following message:
c.
Pressing the
[#]
button during the test cancels the test (turning on the
ONLINE lamp), restoring the state for step 2.
When
REG ADJ RESULT
is executed:
Same button operations as used when REG ADJ EXECUTE is executed.
32
