Print Quality Pages
The print quality test pages can be printed from either the Diagnostics Menu or
Configuration Menu (CONFIG MENU).
When printed from the Diagnostics Menu, additional information is included,
and the
print cartridge lockout is bypassed
.
Additional configuration information may be included on the print quality pages which is
not included on the print menu page.
The print quality pages consist of four pages. Page one contains a mixture of graphics and
text. Page two is gray with two one-inch black squares located on the bottom right. Page
three is solid black page and page four is blank. If duplex is turned on, the pages are
duplexed. The Print Quality Test pages are printed in English and must always be printed
on letter, legal, or A4 paper.
The following is printed on the first page:
•
Device Information to include page count, installed memory, processor speed,
serial number engine ID, system card ID, and printer revision levels
•
Cartridge Information
•
Printer Margin Settings
•
Scanner Margin Settings
•
Minimum Stroke Width
Reports - Menu Settings Page
To print the Menu Settings Page:
•
Select
Menu Settings Page
from
Reports
. The message
“Printing Menu Settings
Page”
is displayed.
•
The following settings are printed:
Maintenance Counter Value USB Scan to Local
Print Quality Pages
Reports SIZE SENSING
Panel Menu
PPDS Emulation Factory Defaults
Energy Conserve
Min Copy Memory NumPad Job Assist
Fax Storage Location
ADF Edge Erase FB Edge Erase
Scanner Manual Registration
Disable Scanner Paper Prompts
Envelope Prompts
Disk Encryption Wipe Disk
Font Sharpening
Required Standby LES Applications
Key Repeat Initial Delay
Key Repeat Rate Wiper Message
Clear Custom Status
•
Select
“
Back”
to return to the Configuration Menu.
32
