Oki MB472dn, Руководство пользователя

Страница: 588 / 1137

Mono (Binary) High
Edge Erase Setting OFF Sets whether to erase the edge shadow created in the surrounding of 2-page
spread documents.
Width 5 mm
(0.2 inch) Sets an erasing width.
Available range: 5 to 50 mm (0.2 to 2.0 inches)
E-mail
Setup
File Name (NULL) Sets a file name. You can enter up to 64 one-byte characters.
The following options can be set.*
1
#n: adding a serial number from 00000 to 99999
#d: adding the date of a file creation (yymmddhhmmss)
(yymmddhhmmss)
Template Edit Subject (NULL) Registers or edits e-mail subject text. You can enter up to 80 characters.
Edit Body (NULL) Registers or edits e-mail body. You can enter up to 256 characters.
From /
Reply To
From (NULL) Sets the e-mail address that is displayed in the [From] field. You can enter up
to 80 characters.
E-mail Sender
ID
(NULL) Sets the sender name that is displayed in the [From] field. You can enter up
to 32 characters.
Reply
To
Address
Book
(NULL) Sets the e-mail address that is displayed in the [Reply to] column. You can
enter up to 80 characters.
Direct
Input
(NULL)
LDAP (NULL)
Broadcast Destination ON Sets whether an e-mail address confirmation screen is displayed before
broadcasting the e-mail.
MDN Response OFF Sets whether to request the MDN (message disposition notification) response.
A/R Full Print OFF Set whether to print the transmission and reception history reports
automatically.
MCF Report OFF Sets whether to print a confirmation after transmission of Internet fax and
Scan to E-mail.
Timeout of MCF Report 15 minutes Sets the timeout for printing a confirmation after transmission of Internet fax
and Scan to E-mail. If the setting period of time is exceeded, the report is
automatically printed without the MDN response.
Print Check Message OFF Sets whether to report the error content if a transmission error occurs.
USB
Memory
Setup
File Name (NULL) Sets the default file name. You can enter up to 255 characters.
The following options can be set as the default file name.*
1
#n: adding a serial number from 00000 to 99999
#d: adding the date of a file creation (yymmddhhmmss)
(yymmddhhmmss)
TWAIN
Setup
Network TWAIN ON Sets whether to use the Network TWAIN.
Port No.*
2
9967 Sets the port number.
Available range: 1 to 65535
WSD Scan
Setup
WSD Scan Enable Specifies whether to use WSD Scan.
Binding Long Edge
Bind
Sets the default binding position.
PC Scan
Mode
PC Scan Mode Simple
Scan Mode
Selects the default PC scan mode.
Scanner
Calibration
Execute Starts a scanner calibration.
*1
For profiles, "#n" or "#d" can be specified for [File Name].
If specifying "#n": 5-digit serial number from 00000 to 99999
If specifying "#d": Date and time when a file is created. 12-digit number in yymmddhhmmss format
yy: Year created (the last two digits of the Christian Era) hh: Hours created (00 to 23)
mm: Month created (01 to 12) mm: Minute created (00 to 59)
dd: Date created (01 to 31) ss: Second created (00 to 59)
* The date and time when a file is created are values of the timer of MB472.
An example of file name specification (if the file format is PDF)
If specifying "DATE#n": Saved as file names such as "Data0000.pdf" and "Data00001.pdf".
587