Oki MB472dn, Руководство пользователя

Страница: 599 / 1137

Power Save Power Save Time 1 minute Sets when to enter Power Save mode.
Sleep Time 30 minutes Sets when to enter Sleep mode.
Auto Power Off Time 4 hours Sets when to enter Auto Power Off.
Silent Mode ON Specifies a print preparation operation when entering standby status from
Sleep mode.
If [ON] is set: it is quiet as there is no print preparation.
If [OFF] is set: there is a rotation noise of the image to perform print
preparation but you can start first printing early.
ECO Mode*
1
ON If [ON] is set: Printing starts even before the temperature of the fuser
reaches the prescribed degrees, if the job is small.
If [OFF] is set: Printing starts after the temperature of the fuser reaches
the prescribed degrees.
Memory Setup Receive Buffer Size Auto Sets the reception buffer size that local interface secures.
Resource Save OFF Sets the resource save area.
Flash Memory
Setup*
1
FLASH0:
Initialize
Execute Initializes flash memory.
Display condition: [Initial Lock] is set to [Disable].
SD0:
Initialize
Execute
Format
Partition
PCL (NULL) Formats a partition.
Common (NULL)
Storage
Maintenance
Setup
Initial Lock Enable Sets whether to give permission to change settings associated with the
memory initialization.
Encryption
Setup
Job Limitation Disable If [Encrypted Job only] is selected, all requests for print except encrypted
authentication printing are ignored.
Language
Maint Setup
Initialize*
1
Execute Deletes downloaded message files.
Admin
Password
New Password
Enter password
(Verify)
aaaaaa Changes the administrator password. 6 to 12 characters can be used.
Reset Settings*
2
Execute Deletes job macros, fax transmission/reception data, and the history
information, and returns the settings to the default.
Job Log Setup Save Job Log*
1
Enable Sets whether to save job logs.
Clear Job
Log*
3
Execute Clears the saved job logs.
Display condition: [Save Job Log] is set to [Enable].
Print Statistics Supplies Report Disable Sets whether to print the consumable counter's report.
Reset Main
Counter
Execute Resets the main counter.
Reset
Supplies
Counter
Execute Reset the consumable counter.
Display condition: [Supplies Report] is set to [Enable].
*1
A message is displayed to confirm the equipment restarts automatically when changes have been made. Select [Yes] to continue.
Select [No] to cancel.
*2
A message is displayed to confirm the equipment restarts automatically when executed. Select [Yes] to continue. Select [No] to
cancel.
*3
A message is displayed to confirm that all job logs are deleted when executed. Select [Yes] to continue. Select [No] to cancel.
598