Oki Data CONFIDENTIAL
45850101TH Rev.1
2-16
2. TROUBLESHOOTING PROCEDURES
No. Category PJL Status
Code
Panel messages
Description
79 Warning
10646
Output error.
For the paper setting that a paper cannot be
ejected in 2nd Bin, the paper ejected in 1st Bin.
A message disappears by pressing CLOSE
button.
80 Warning
40963
Duplex print error. For the paper setting that a duplex printing is not
possible, it was printed in simplex.
81 Warning
10665
Multi-purpose
tray has not
been configured
properly, verify
multi-purpose tray
settings. Multiple
copies printed.
Press Close Button
Rotate sort printing was selected, but the function
didn't work because MP Tray Usage setting was
not set as it can be used as Tray..
The message continues to be displayed until an
OK button is pressed.
82 Warning
10666
Hard disk is not
installed. Multiple
copies printed.
Press Close Button
Rotate sort printing was selected, but the function
didn't work because HDD was not attached.
The message continues to be displayed until an
OK button is pressed.
83 Warning
10644(2nd
Bin)
10645(1st
Bin)
Output Tray (or
Upper Output Tray)
Full.
1st Bin or 2nd Bin is stacked full. Remove the
paper.
84 Warning
-
Check the sensor
of the automatic
document feeder
(ADF) on the
scanner.
Press [Details]
to continue with
measures.
At the time of device start, a sensor for
overlapped feeding is checked. In the case of the
sensor output level that paper powder attached
to, the status is raised. After the cleaning and
closed ADF cover by the customer, the status is
resumed when the sensor output level becomes
normal.
85 Warning
-
Connot change
language during
printing.
During the printing, an operation to change the
language is invalid. The message is displayed
and beep sounds.
It is resumed by pressing CLOSE key or wait 3[s].
