Oki ES8473, Руководство по обслуживанию

Страница: 114 / 271

45850101TH Rev.1
3-5
Oki Data CONFIDENTIAL
3. MAINTENANCE MENUS
Item1 Item2 Item3 Item4 Item5 Value
Default
value
ODA
Default
value
OEL
Default
value
JP
Notes
Password Scanner
Maintenance Adjust Scan
Position ADF
(Frontside) Side Reg. +30~ -17 mm 0 0 0 Adjusting the position of the scanning start pixel by one Step=4/600
dpi (= 0.17mm) at the book scanning. This Item use the adjustment of
registration when ADF duplex scanning.
Front Edge +30 ~ -30 mm 0 0 0 When reading a document from the ADF, add a value for the basic
value when reading the shadow of the front edge of the document. To
skip the front edge of the document, add a negative value.
Increase or decrease the number of motor pulses from detection by
the sensor of the front edge of the media until actual reading starts.
Adjust in intervals of one step = 4/600 dpi (= 0.17 mm).
Back Edge +30 ~ -30 mm 0 0 0 When reading a document from the ADF, add a value for the basic
value when skipping the back edge of the document. To read the
shadow of the back edge of the document, add a negative value.
Increase or decrease the number of motor pulses from detection by
the sensor of the back edge of the media until actual reading ends.
Adjust in intervals of one step = 4/600 dpi (= 0.17 mm).
ADF
(Backside) Side Reg. +30~ -17 mm 0 0 0 Adjusting the position of the scanning start pixel by one Step=4/600
dpi (= 0.17mm) at the book scanning.This Item use the adjustment of
registration when ADF duplex scanning.
Front Edge +30 ~ -30 mm 0 0 0 When reading a document from the ADF, add a value for the basic
value when reading the shadow of the front edge of the document. To
skip the front edge of the document, add a negative value.
Increase or decrease the number of motor pulses from detection by
the sensor of the front edge of the media until actual reading starts.
Adjust in intervals of one step = 4/600 dpi (= 0.17 mm).
Back Edg +30 ~ -30 mm 0 0 0 When reading a document from the ADF, add a value for the basic
value when skipping the back edge of the document. To read the
shadow of the back edge of the document, add a negative value.
Increase or decrease the number of motor pulses from detection by
the sensor of the back edge of the media until actual reading ends.
Adjust in intervals of one step = 4/600 dpi (= 0.17 mm).
Adjust
ADF Scan
Position +30 ~ -30 mm 0 0 0 Set the CIS reading position of the ADF for the focusing standard.
Adjust in intervals of one step = 4/600 dpi (= 0.17 mm). This is
correlated to adjustment of the ADF front edge position.
Adjust Mech. Adjust FB
Motor
FB Drive
Current 10 ~ 1400 [mA] 530 [mA] 530 [mA] Only for engineering test Connect a panel or PC and set the electric
current value of the scanner motor.
FB H.P Drive
Current 10 ~ 1400 [mA] 530 [mA] 530 [mA]
FB Keep
Current 10 ~ 1400 [mA] 50 [mA] 50 [mA]
Adjust ADF
Motor ADF Hopping
Drive Mono
Current 10 ~ 1400 [mA] 960 [mA] 960 [mA]
ADF Transfer
Drive Mono
Current 10 ~ 1400 [mA] 1050 [mA] 1050 [mA]