Oki ES5460 Скачать руководство пользователя страница 82

Страница: 82 / 128

Maintenance > 82

Note the positions of the four cartridges.

(a)

Pull the coloured toner release lever (1) on the cartridge to be replaced fully

towards the front of the MFP.

Lift the right-hand end of the cartridge and then draw the cartridge to the right to

release the left-hand end as shown, and withdraw the toner cartridge out of the

MFP.

Put the cartridge down gently onto a piece of paper to prevent toner from marking

your furniture.

Remove the new cartridge from its box but leave its wrapping material in place for

the moment.

1. Cyan cartridge

2. Magenta cartridge

3. Yellow cartridge

4. Black cartridge

CAUTION!

The green image drum surface is very delicate and light sensitive.

Do not touch it and do not expose it to normal room light for more

than 5 minutes. If the toner cartridges need to be out of the MFP

for longer than this, please lower the top cover. Never expose the

drum to direct sunlight or very bright room lighting.

Содержание ES5460

































































































































Результаты поиска

Содержание ES5460

Отзывы:

Бренды по названию

Популярные бренды

Oki ES5460, Руководство пользователя

Результаты поиска

Содержание ES5460

Отзывы:

Бренды по названию

Популярные бренды