Oki ES5460, Руководство пользователя

Страница: 40 / 128

Configuring your machine.... > 40
Colour menu
ITEM CHOICE DESCRIPTION
Density Control AUTO
MANUAL
If set to AUTO, image density will be automatically
adjusted at power on, when a new image drum or
toner cartridge is installed, and at intervals of 100,
300 and 500 drum counts. If a 500 drum count
interval occurs during a print job it will occur at the
end of that job, and will take up to 55 seconds. If set
to manual, this adjustment will only be performed
when initiated by the next menu item.
Adjust Density EXECUTE Selecting this will perform the auto density set up
immediately.
Colour Tuning PRINT PATTERN Selecting this item prints the colour tuning pattern
to help you adjust the colour balance.
C Highlight
C Mid-Tone
C Dark
M Highlight
M Mid-Tone
M Dark
Y Highlight
Y Mid-Tone
Y Dark
K Highlight
K Mid-Tone
K Dark -3~ 0 ~+3
-3~ 0 ~+3
-3~ 0 ~+3
-3~ 0 ~+3
-3~ 0 ~+3
-3~ 0 ~+3
-3~ 0 ~+3
-3~ 0 ~+3
-3~ 0 ~+3
-3~ 0 ~+3
-3~ 0 ~+3
-3~ 0 ~+3
Adjusts image density for each colour component
(cyan, magenta, yellow and black). Normal setting is
0.
C Darkness
M Darkness
Y Darkness
K Darkness -3~ 0 ~+3
-3~ 0 ~+3
-3~ 0 ~+3
-3~ 0 ~+3
Adjusts darkness of each colour component (cyan,
magenta, yellow and black). Normal setting is 0.
Ajst Registration EXECUTE Performs automatic colour registration adjustment.
Normally this is done on power on and when the top
cover is opened and then closed. This process
accurately aligns the cyan, magenta and yellow
images to the black image.
C Reg Fine Ajst
M Reg Fine Ajst
Y Reg Fine Ajst -3~ 0 ~+3
-3~ 0 ~+3
-3~ 0 ~+3
Performs fine adjustment of image timing in relation
to the black image component.
Ink Simulation OFF
SWOP
EUROSCALE
JAPAN
Selects from a range of industry standard colour
swatches.
UCR LOW
MEDIUM
HIGH
Selects limitation to the toner layer thickness.
If paper curl occurs in dark printing, selecting
MEDIUM or LOW sometimes helps reduce this curl.
UCR = Under curl Removal.
CMY 100% Density DISABLE
ENABLE
When enabled, black areas are produced using
100% C, M, and Y instead of black. This results in a
glossier finish.
CMYK Conversion ON /OFF Setting to OFF will simplify the conversion process of
CMYK data, which will reduce the processing time.
This setting is ignored when Ink Simulation function
is used.
PS only.