Oki ES3640 MFP Скачать руководство пользователя страница 86 | Manualshive

Страница: 86 / 134

Oki ES3640 MFP Скачать руководство пользователя страница 86

400: Paper Size Error / 401: Multiple sheet feed error

Condition

Error indicating that the detected size is not the specified size. The printer ejects the paper, then, displays the error.

* Error 401 may occur along with Error 400 when the paper is fed from the tray.

Cause

There are several possible causes for this problem.
1. Hopping roller or Registration roller cannot transport paper because they have become dirty with paper dust, etc.
2. A piece of paper, foreign substance, etc., has got stuck in the IN1 or IN2 sensor lever.
3. IN1 or IN2 sensor motion failure.
4. Sheets are sent stuck together due to large friction (due to static charge, etc) (Multi feeding).

How to remove the jammed paper

1. If Error 400 or 401 occurs by itself, paper is ejected. So there’s no need to remove the paper. Open/close the top cover.

Check Points

Frequent Error 400/401

Remove the tray and clean / replace the hopping rollers (3).

For instruction on how to clean MP

tray’s HP rollers, see Error 390. Check to ensure the paper guides of the tray are correctly set (if it matches the paper size).
Open the tray1 side cover and the side cover, and check the following areas and clean them.

Fan paper well and align the

edges, then, set them in the tray.

Pull out the tray - Open the side cover - Clean or replace the rollers.

Check Paper Guides

Jam indication though there seems
to be no jammed paper:

Check for a piece of paper or

foreign substance in the IN1 or 2
sensor.

Check if the IN1 or 2

sensor arm

moves up and down smoothly.

Frequent Jams:

Check the registration roller and

clean thoroughly.

Check for a piece of paper or

foreign substance in the paper path.

«
...
84
85
86
87
88
...
»

Содержание ES3640 MFP







































































































































Отзывы:

Нет отзывов