Oki ES3640 MFP Скачать руководство пользователя страница 68

Страница: 68 / 134

Scan Direction Bands, Voids, or Streaks

There are areas of the image that are extremely light or are missing entirely. The missing
areas form bands that run along the page from the leading edge to the trailing edge in the
direction of paper travel.

Initial Actions:

Perform Initial Actions from

Print Quality Troubleshooting Practices

Areas of the Printer that Apply to Scan Direction Bands, Voids, or Streaks

Imaging Unit
Transfer Unit belt
LED Heads

Troubleshooting Steps

Resolution

1. Print the 100% Solid Fill test print. Are the missing bands in the process

direction?

Yes – Go to Step 2.

No - See "Process Direction
Bands, Voids, or Streaks" on

page 27.

2. Are there any obstructions, dirt or debris in the printer’s paper path?

Yes – Clean or remove

obstructions.
No - Go to Step 3.

3. Clean the LED Heads with at dry, lint free cloth. Did this fix the problem?

Yes – Complete.

No - Go to Step 4.

4. Remove the each Toner Cartridge and check for toner starvation within the
Imaging Unit(s).

Yes – Replace the Toner
Cartridge.

No - Go to Step 5.

5. Swap the LED Head of the problem color with any other LED Head. Print a Solid

Fill Test Pattern. Has the problem moved with the LED Head?

Yes – Replace the defective LED

Head
No - Go to Step 6.

6. Swap the Imaging Unit of the problem color with any other Imaging Unit.

NOTE:

Remove the keys before swapping. Print a Solid Fill Test Pattern to check

for defects. Has the problem color moved with the
Imaging Unit?

Yes – Replace the defective

Imaging

Unit.
No - Go to Step 7.

7. Check the Fuser for damage.

Yes – Replace the Fuser.

No - Replace the Engine Control

Board

Содержание ES3640 MFP







































































































































Результаты поиска

Содержание ES3640 MFP

Отзывы:

Oki ES3640 MFP, Руководство по обслуживанию и устранению неисправностей, Страница: 68 / 134

Результаты поиска

Содержание ES3640 MFP

Отзывы: