System Adjust
Item
Description (Printer Defaults are indicated in
Blue
)
Power Save Time
Sets the period after which power save mode starts. 5 min, 15 min, 30 min,
60
min
, 240 min
Clearable Warning
When Online is selected, you must manually clear the warning by pressing the
Online button. Change to Job if you wish the message to automatically clear
when a new print job is received.
Online
or Job
Auto Continue
Sets whether the printer is automatically recovered when Memory Overflow or
Tray Request occurs. ON or
OFF
Manual Timeout
If paper is not fed within this time in manual feed, the job is cancelled. OFF, 30
sec,
60 sec.
Wait Timeout
Sets the time period between stopping receipt of job data and forced print. For
PS, printing is not carried out and the job is cancelled. Range is off, 5 sec. to
300 sec. default is
40 sec.
Low Toner
Sets the printing operation when insufficient toner is detected.
Continue
:
the
printer can continue printing while remaining online. Stop: the printer stops
printing and goes offline.
Jam Recovery
ON
: continues printing the job, including any jammed pages, once the jam has
been cleared. OFF: Cancels a job including the page currently jammed.
X Adjust - Adjusts the position of the whole printing image (0.25 mm at a time)
Range is -2.00 to +2.00 mm (horizontally). Default is
0.00mm.
Y Adjust - Adjusts the position of the whole printing image (0.25 mm at a time)
Range is -2.00 to +2.00 mm (Vertically). Default is
0.00mm.
Duplex X Adjust - During the flip-side printing of duplex printing, adjusts the
position of the whole printing image (0.25 mm at a time. Range is -2.00 to
+2.00 mm (horizontally). Default is
0.00mm.
Print Position Adjust
Duplex Y Adjust - During the flip-side printing of duplex printing, adjusts the
position of the whole printing image (0.25 mm at a time. Range is -2.00 to
+2.00 mm (Vertically). Default is
0.00mm
.
Darkness Cyan,
Magenta, Yellow, Black
Adjusts the engine density for Cyan, Magenta, Yellow, Black. Darkest value is
+3, Lightest value is -4. Default is
0
.
Cyan Reg. Adjust
Magenta Reg. Adjust
Yellow Reg. Adjust
Makes fine adjustment to image registration against Black in the horizontal
direction. Adjust. is for Cyan, Magenta, Yellow. Range is -3 to +3. Default is
0
.
Paper Black Setting
Used for micro adjustment when very visible faded print results or light specks
(or streaks) result when printing in Plain Paper/Black setting. Range is -2 to
+2. Decrease the value if light specks (or streaks) or snow flake like printing
results in high density print areas. Default is
0
.
Paper Color Setting
Used for micro adjustment when very visible faded print results or light specks
(or streaks) result when printing in Plain Paper/Color setting. The range is -2 to
+2.Decrease the value if light specks (or streaks) or snow flake like printing
results in high density print areas. Default is
0
.
Transparency Black
Setting
As for Paper Black Setting above. The range is -2 to +2. Default is
0
.