Oki ColorPainter M-64S, Руководство пользователя, Страница: 30 / 84

30
Printing on reflective sheeting
19
EDGE GUARDS POSITION
OK?
Open the front cover and place both edge
guards on the media edges. Place the media
edges in the notches on the edge guards.
Then close the front cover.
Check that the edge guards do not go under the media,
or that the media advance smoothly in case of particularly
thick media.
Check visually that the media edge guards are correctly
placed then press the
OK button.
20
SELECT MEDIA TYPE
2
XX: XXX
SELECT MEDIA TYPE
2 01: PAPER
Select the media type.
Select a registered media type using the Up and Down
buttons, then press the OK button.
Media preset for reflective sheeting
07: RFLTIV is set by default as the preset for
reflective sheeting. Therefore, select this preset.
SELECT MEDIA TYPE
2
XX: XXX
SELECT MEDIA TYPE
2 07: RFLTIV
• • •
(Display the media presets)
SELECT MEDIA TYPE
CREATE NEW PRESET
(Enter the media preset menu)
To create a new media preset
At the end of the media preset list, CREATE NEW
PRESET is displayed.
Press the OK button to enter the media registration
menu.
The procedure to create a preset is the same as in
the MEDIA REG menu.
Press the
CANCEL button to cancel the entered
parameters.