Oki C542, Руководство пользователя

Страница: 113 / 126

- 113 -
6. Troubleshooting
File loading from USB.
Data is being read from USB Memory.
Press the Stop button to cancel reading.
Image Drum Sensor Error.
The toner sensor error has occurred in the image drum indicated on the screen.
Rear Output Tray is open, so 2-sided printing is disabled. Error code: 581
2-sided printing failed because the rear output tray is open.
Close the rear output tray and tray again.
Printing was stopped. Rear Output Tray was opened during printing. Open the Output
Tray. Error code: 409
The rear output tray was moved while duplex printing.
Close the rear output tray and remove the jammed paper remaining inside of the unit.
Toner empty. Replace with new Toner Cartridge.
The indicated cartridge ran out of toner.
Replace the empty toner cartridge with a new one.
Wait Timeout in menu is disabled. Printing is disabled except by USB. Clear page
buffer and enable time out in menu.
Wait Timeout is disabled.
Wireless settings are incomplete.
Wrong values are set or items remain unset in the wireless LAN settings. Check the wireless settings.
Not connected to wireless access point.
No wireless LAN access points are found.
Make sure that the access point is turned on.
Disconnect and re-connect to wireless LAN.
Wireless startup failed.
Restart the machine. If the error persists, contact your dealer.
Firmware Update Error Please try again. If network doesn't work, please try firmware
update over USB.
Updating the firmware failed. Update again.
Registering with Google Cloud Print. Don't turn off the power until registration is
complete.
This machine is being registered to the Google Cloud Print service. Wait for a while.
Deleting from Google Cloud Print.
This machine is being removed from the Google Cloud Print service. Wait for a while.
Caution, unknown Consumable detected Go to User Manual "Trouble Shooting" to
restore operation
You can use any consumables in your product, but you must accept the risks of using non-genuine consumables.
If the use of non-genuine consumables causes damage to the product or results in your product not functioning to its
full specification, then such damage or effect on the product is not covered by warranty.
To accept these risks and to restore function; 1. Turn off your product 2. Press and hold the CLEAR button and turn
your product on 3. After start up, release the CLEAR button Note This operation will be recorded for future
reference.
Replace the image drum. [PAGES] Pages Left.
The image drum indicated on the screen reaches its lifetime.
Replace the image drum with a new one.
C: Cyan (blue), M: Magenta (red), Y: Yellow, K: Black
Replace the image drum. Print Quality Not Guaranteed.
The image drum indicated on the screen reaches its lifetime.
Replace the image drum with a new one.
C: Cyan (blue), M: Magenta (red), Y: Yellow, K: Black