© 2019 OJ Electronics A/S
5
QUICK START GUIDE OJ-DV-HMI-35T
Menu tree
The top level menu tree of the OJ-DV-HMI-35T is shown below.
The main menu contain eight sub menus, and some of these have their own sub menus.
Installation
OJ-DV-HMI-35T can be fitted onto a flat surface using a screw
or magnets where appropriate.
Fitting onto a flat surface using a screw
The rear of the HMI unit has a keyhole-shaped hole for hanging
the unit on a screw that has been screwed into the flat surface
(see Fig. 1.1). Use a screw with a diameter that is not greater
than 3.5 mm and a length that is not longer than 9 mm.
Fitting onto a flat metal surface using magnets
The black protective cover contains two magnets. The HMI can
be fitted onto a vertical flat metal surface using the bumper
cover (see Fig. 1.1).
Figure 1.1
Installation on flat surface
BR1040A01a
