OJ Electronics comfort system4, Руководство пользователя

Страница: 2 / 20

2
© 2013 OJ Electronics A/S
Comfort System4
TM
English
Introduction
Comfort System4™ is a complete control system for multi-room,
electric heating systems consisting of up to 16 rooms. The system
consists of a Central Controller with Thermostats, Panel Heater
Controller and an Ethernet Gateway. The wireless Central Controller
and Thermostat with room and/or floor sensor ensures maximum
comfort and minimum energy costs.
The Central Controller is a central unit for controlling and monitor-
ing up to 16 rooms. Animated menu navigation ensures easy setup,
monitoring of energy consumption and selection of comfort mode or
holiday mode.
The Central Controller has 5 built-in schedules. For each day of the
week, individual temperatures can be set for 4 different periods,
called events, all of which can be adjusted to suit your needs. Low-
ering the temperature when the home is unoccupied reduces energy
costs without reducing comfort.
Furthermore, the Central Controller features an adaptive function
that automatically adjusts heating period start times to ensure that
the required temperature is reached at the required time. After 3
days the adaptive function has learned when the heating must be
switched on.
Gateway is a new possibility for viewing and controlling Master func-
tions from a distance. With a PC, tablet or smartphone, you can gain
access to Master functions via Gateway and the Internet. Among
other things, this gives you the opportunity to: - turn on the heating
in your summer cottage before you arrive; - turn down the tempera-
ture at home if you decide to prolong your holiday; or simply - make
small alterations to the settings if you change your daily routine.
FIRST TIME SETTINGS
Central Controller
The first time you switch the power interrupter to ON “ I ”, language,
time and date must be set. The menu will automatically guide you
through the process.
• Choose your language with the up and down buttons and confirm
with
OK .
• Set the actual hour and press the OK button. Then set the min-
utes. Press OK .
• Set the actual date: year, month and day. Confirm the settings
with the OK button.
• Choose the room or zone to which the controller is to be allotted.
• You are now given the opportunity of connecting the wireless
thermostats. Confirm with OK .
Connecting Thermostats
Before connecting the thermostats it is a good idea to note the
zone/room for the various thermostats so as to facilitate setup, see
table at back of the manual.
• Switch on the power of the first thermostat/pan-
el heater controller. For the next 120 seconds,
the unit will transmit a unique signal to the con-
troller. The thermostat will display its assigned
address and the signal strength. The controller
will display the same address.
• Switch on the power of the next thermostat/
Panel heater controller to be connected. Repeat
the procedure for all other thermostats/ Panel
heater controller.
• The units connected can now be grouped into
an area name or zone number on the controller. Up to 5 area
names can be chosen.
Press
OK for the chosen address and use the navigation but-
tons to select a suitable group.
Press Exit to complete the setup and the controller will show the
initial display.
• Comfort System4 is now ready for use and will control your
heating system in accordance with the pre-programmed 4-event
schedule, see
Factory settings .
• Remember to note your settings for each thermostat/relay
point in the table on the back page.
NOTE: Control type is factory set to Room/limit . Control type
can be changed in Engineer settings/Application (page 4).
CS4
TM
CENTRAL CONTROLLER
Navigation buttons
Power interrupter
General operation
The interrupter button allows you to turn the controller on “ I ” and off
“ 0 ” by sliding the button up and down. When the Central Controller
is switched off “ 0 ”, the relay disengages. All settings, including time
and date, will be remembered.
The Central Controller is intuitively operated using the navigation
buttons.
The function of each button is indicated above the button on the
display.
Back
Back
Various menus and submenus contain a Back
option.
Use
Back to return to the previous step.
Exit
Exit
Returns to the initial display.
Select room
The initial display allows you to select the room for which you want
the actual set temperature and event mode to be displayed.
Use the left and right arrow buttons to select the desired room.
Operation mode
The Central Controller features 5 different types of temperature con-
trol. Press
Select , then Mode :
OK


Holiday
Holiday mode
Select Holiday if you want to lower the tem-
perature in all rooms for a specific period to
save energy, e.g. if the house is uninhabited
for a period of time.
• Press
OK for Holiday, select the stop time
and date, press OK . Select the holiday temperature and confirm
with OK .
The comfort system is now in Holiday mode and a suitcase is
displayed. When the specified date and time is reached, the Central
Controller will automatically revert to
Auto mode .