Oilon RP-130 M, Руководство по эксплуатации и обслуживанию

Страница: 33 / 77

4. 4. First start-up and adjusting First start-up and adjusting
4.1. 4.1. First start-up and adjusting First start-up and adjusting
Keep the boiler doors closed during ignition and operation.
4.1.1 4.1.1 Prepatory to first start up Prepatory to first start up
.
Check the boiler and it's components are in proper working order
.
Check the pipings are installed correctly and the joints are tight and have no leaks
.
Check there is sufficiently water in the heating system
.
Check there is adequate air inlet to the boiler room for the burner to have sufficiently
air for combustion
.
Check there is fuel in the oil tank
.
Check electrical connection points (inputs/outputs) are correct
Prior to first start-up the oil pump must be vented. The pump must not operate
without oil. See chapter
”
Oil Pump".
4.1.2 4.1.2 First startup with heavy fuel oil First startup with heavy fuel oil
1. Connect main voltage.
2. Switch ON additional heaters at least 2 hours before start-up.
3. Check the installation of the drilled ball valve on the return line. Check that the valve
is CLOSED.
4. Check oil supply pressure and temperature. See further instructions from 'adjusting
the pump'.
5. Check there is oil in the pump.
6. Check direction of rotation of the burner motor. ( The electric connections are made
correctly ) Check direction of rotation of fan motor and pump motor. ( The electric
connections are made correctly )
7. Check atomizing temperature is correct. See further instructions from 'nozzle capacity
charts'.
8. Move the adjustment ring on burner head to middle position.
9. Check the condition and correct settings of ignition electrodes and cables.
10. Check the correct size and type of the nozzle.
11. Check the cam positions on air damper servomotor.
12. Switch the burner ON to minimum capacity.
13. Check the atomizing pressure is correct.
14. Check the return pressure for ignition phase.
RPMARINES 30820641GB 33 (77)
4. First start-up and adjusting