Oilon Junior Pro 1 J10, Инструкция по эксплуатации и техническому обслуживанию

Страница: 32 / 44

28
10090943EN
9. Maintenance
WARNING! Always switch off the electric power from your burner and close the
manual shut-off valves in the fuel supply line before servicing your burner. When
inspecting your burner you only have to switch off the electric power from your burner.
The manual shut-off valves in the fuel supply line can then be open.
Burner maintenance
In order to ensure reliable operation clean the ignition electrodes and check their setting.
Flame detector has to be kept clean.
Replace the filter, if necessary.
Clean or replace, if necessary, the filter of the oil pump.
Change the nozzle if it is worn, damaged or blocked.
Clean your burner from damp and other airborne impurities and keep the burner clean.
Clean the air flap during the annual maintenance or when needed. Use for ex. normal washing-
up liquid as cleaning agent.
Clean oil and grease spots from burner housing and plastic cover surfaces with a clean wet
cloth. Use as cleaning agent a slightly alkaline washing agent or normal hand washing-up
liquid.
Check regularly the combustion characteristics by flue gas measurements.
An authorized person should inspect the burner at least once a year.
Heating appliance control
Keep the boiler room always clean and the door closed.
Make sure, that there is always sufficient water (pressure) in the heating system.
Have the furnace and the chimney swept regularly.
Check regularly, that the smoke damper is correctly adjusted.
Protect your burner against splash water.
The oil tank must be cleaned when needed, at least every 4 - 5. years.
The boiler room fresh air ventilator must be open.
Check safety devices of heating appliance and burner according to the local requirements.
Check that the boiler and its equipment are on working condition.