Ohyama woozoo IPE-1221G, Руководство пользователя, Страница: 17 / 120

13
EN EN
Drain Water
Install Power cord Hooks
NOTE
2
Drain water from the middle drainage port.
1
direction of power cord
hooks is upward
● To reach the maximum performance, it is not
recommended to drain water, during Cool mode.
● lt is recommended to use the middle drainage port to
drain water, during Dry mode.
● It is recommended to use the bottom drainage port
to drain water, during Heat mode.
● To drain water from the bottom drainage port when
the display shows "H8".
Drainage method
1.Remove the continuous drain cap 1 by turning it
counter clockwise then remove the rubber stopper
2 from the spout.
●
Turn off the unit and pull out the plug from the socket.
●
Place a water container under the bottom drainage
port, or move the machine to a place where it can
drain.
Drain water from the bottom drainage port.
direction of p ower cord hooks is downland
power cord hooks
Bottom drainage port
●
Assemble the power cord hooks at the back of the
unit with screws (the direction of power cord hooks
is as shown in following fig).
●
Remove the rubber plug of the bottom drainage
port to drain water.
●
After draining, insert the rubber plug.
●
Press ON/OFF button to restart.
● Water can be automatically emptied into a floor drain by
attaching 14mm inner diameter hose (not included).
●
Wind the power cord around the power cord hooks.
screws
Drain Water
2.
3.
ATTENTION:
Screw the drain connector to(included in the
package) the spout by turning clockwise.
Insert the drainage hose into drain connector.
When using continuous drainage option from the middle
hole, place portable on a level surface and make sure
garden hose is clear of any obstructions and is directed
downward. Placing portable on an uneven surface or
improper hose installation may result in water filling up
the chassis and causing the unit to shut off. Empty water
in the chassis if shut off occurs, then check portable lo-
cation and hose for proper setup.