Ohyama woozoo IPE-1221G, Руководство пользователя, Страница: 14 / 120

10
EN
Installation Precaution
Requirement of air conditioner
Requirements for electric connection
Safety precaution
1.
2.
3. The place near coast area.
4. The place with oil or fumes in the air.
5. The place with sulfureted gas.
Selection of installation location
Basic requirement
Installing the unit in the following places may cause
malfunction. If it is unavoidable, please consult the
local dealer:
6.
7.
1. Air inlet should be far away from obstacles and do
2.
3.
Select a location where the noise and outflow air
emitted by the outdoor unit will not affect neighb-
orhood.
Please try your best to keep far away from fluor-
escent lamp.
not put any objects near air outlet. Otherwise, it
will affect the radiation of heat discharge pipe.
4.
1.
The place with strong heat sources, vapors, fla-
mmable or explosive gas, or volatile objects spread
in the air.
The place with high-frequency devices (such as
welding machine, medical equipment).
2.
installing the unit.
According to the local safety regulations, use qu-
alified power supply circuit.
3.
The appliance shall not be installed in the laundry.
4.
Other places with special circumstances.
It’s not allowed to be installed on the unstable or
motive base structure (such as truck) or in the
corrosive environment (such as chemical factory).
Must follow the electric safety regulations when
5. Be sure to cut off the power supply before proce-
eding any work related to electricity and safety.
6. Do not put through the power before finishing in-
stallation.
7.
8.
For appliances with type Y attachment, the instr-
uctions shall contain the substance of the following.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
Properly connect the live wire, neutral wire and
grounding wire of power socket.
9. The grounding resistance should comply with na-
tional electric safety regulations.
10.
with national wiring regulations.
WARNING
Observe all governing codes and ordinances.
Do not use damaged or non-standard power cord.
The appliance shall be installed in accordance
The air conditioner is first class electric appliance.
It must be properly grounding with specialized gr-
ounding device by a professional. Please make
sure it is always grounded effectively, otherwise
it may cause electric shock.
The yellow-green wire or green wire in air conditi-
oner is grounding wire, which can't be used for
other purposes.
Be caution during installation and maintenance. Pr-
ohibit incorrect operation to prevent electric shock,
casualty and other accidents.
11.
sheet:
To be in compliance with IEC 61000-3-11, impe-
0.13
dance value of power-supply system connected
models
IPE-1221G
IPE-1221GH
max |Zsys| unit:ohm
to product must be less than or equal to the all-
owable maximum value of |Zsys| in the following
Accessory list
User's manual
Battery
Heat discharge
Preparation before Installation
pipe
Joint A
(AAA 1.5V)
NOTE
Check if the accessories are available before insta-
llation.
Drain connector Power cord hooks Screws
Rear clip
Remote controller
FAN
ON/OFF MODE
SLEEP
SWING
TIMER
SWING
T-ON T-OFF
COOL
AUTO
DRY
FAN
HEAT
SLEEP
LOCK
SPEED
H AUTO
OPER