01/04/2021
Page 6
7. ENGINE OIL
Use engine oil
4T 10W40
only.
7.1.
OIL QUANTITY (with engine completely empty)
ENGINE
QUANTITY ( total )
110 A
1100 cc
110 4S
850 cc
160 4S
1100 cc
190 DAYTONA
1001
cc
7.2.
ENGINE OIL LEVEL CHECK
110 A model
•
Start the engine and let it run at the minimum rotation speed for 3/5 min, then turn it off.
•
After 2/3 min. place the vehicle on a flat surface in vertical position (without stand).
•
Remove the filler cap placed on the right side of the engine, clean the level rod and
insert it in again without screwing it.
•
Remove level rod and check the level ( the oil should be nearly the max marker)
.
Eventually, add the correct amount of oil in order to restore the correct level.
•
Screw the cap until it’s firmly close.
110 4S e 160 4S model
•
Start the engine and let it run at the minimum rotation speed for 3/5 min, then turn it off.
•
After 2/3 min. place the vehicle on a flat surface in vertical position (without stand).
•
Remove the filler cap placed on the right side of the engine, clean the level rod and insert
it in again screwing it in completely.
•
Remove level rod and check the level ( the oil should be at 5 mm [ 0.20 in ] from max
marker). Eventually, add the correct amount of oil in order to restore the correct level.
•
Screw the cap until it’s firmly closed.
190 Daytona model
•
Start the engine and let it run at the minimum rotation speed for 3/5 min, then turn it off.
•
After 2/3 min. place the vehicle on a flat surface in vertical position (without stand).
•
The oil level must be between the half and the top of the porthole
.
•
To restore the correct oil level, open filler cap placed on the right side of the engine
and add the necessary quantity of oil
.
NOTE
Overfilling oil or using the vehicle with insufficient oil can cause engine damage. It
is recommended not to use different types of engine oil.