01/04/2021
Page 3
2. HALF-HANDLEBAR POSITION
Fixing of the half-handlebars:
•
In the case of half-handlebar bracelets as in fig. A, lay them against the upper steering plate and hold them in position
manually.
•
Insert the half-handlebar inside the seat of the bracelet and rotate it until obtaining the ideal position for rider’s
ergonomics.
•
Tighten the fixing screw of the half-handlebars indicated by the arrow. (tightening torque max 22 Nm)
•
Repeat the operations for the other half-handlebar.
3. CHOKE
– STARTING THE ENGINE
3.1.
HANDLEBAR CHOKE COMMAND
Choke command is placed on the left side half-handlebar for mod.
110 Automatic or equipped with DELL’ORTO PHBH 28 carburetor.
To activate it, it is necessary to press the lever along its entire stroke
according to the direction indicated in the figure and keeping it in
position.
3.2. CARBURETOR CHOKE COMMAND
The choke command is present on the left-side of the carburetor. To activate it, press the lever along the direction
indicated in the figure.
Mikuni 22
ZS PZ27
Kehin PE28
For mod. 110 4S
For mod. 160 4S
For mod. 190 DAYTONA
160 4S
