01/04/2021
Page 8
The brake fluid must be replaced every 2 years. Maintenance operations must be carried out by authorized
personnel only.
9.2.
BRAKE LEVER REGULATION
– JJUAN BRAKE SYSTEM
Follow the steps below to adjust the height of the brake lever correctly:
•
Unscrew the M5 screw until contact is obtained between the screw and the lever.
•
Unscrew the M6 nut of the pusher.
•
Screw or unscrew the pusher using a 3mm allen key to move the lever forward or backward. Do not exceed the allowed
range (fig. 2).
•
Once found the desired height, tighten the M6 nut.
•
Tighten the M5 screw until the clearance shown in the figure in obtained (fig. 3).
The liquid used in the braking system is highly corrosive to painted parts and tires. Make
sure that none of the parts mentioned come in contact with the liquid. Protect the fairings
and other painted parts from even minimal contact with the liquid and follow all the
warnings and instructions indicated in the package.
NOTE: It
’s very important to follow the step-by-step instructions. ALWAYS check that the
play of the lever complies with that shown in figure 3.
