ohmex FRY 3003, Инструкция по эксплуатации

Страница: 71 / 80

65
FRY 3003
EN
• Gradually insert the bucket (10) in the oil container (9) to avoid that oil comes out by
reaction with the moisture inside food.
Oil (or grease) inside the bucket reaches a high temperature.
Burns risk
Do not introduce the bucket (10) in the oil container (9) if the indicator light
(13) is on.
• Close the lid (3).
• Turn the timer selector (15) on the desired cooking time.
• Check the cooking status through the inspection window (5).
• When cooking is over, a “beep” sounds and the timer (15) moves on “OFF”; the
“WORKING” indicator light (13) turns off. The fryer is off.
• Remove the lid (3) by holding from the handle (4).
• Slowly remove the bucket (10) through the handle (11) and hook it in drainage po -
sition for a few minutes (Fig. F4).
• Wait a few moments to let oil drip.
• Remove the bucket (10) and place fried foods on an absorbent cooking paper sheet
to remove oil and make them tastier and “lighter”.
• Proceed to a new frying.
• When cooking is over, disconnect the plug from the power socket.
After immersing the bucket (10) together with food, pay attention
to not let oil leak from the appliance.
To avoid this possibility, behave like follows:
• do not overload the bucket (10) with food;
• make sure, before immersing the bucket (10) in oil, that food
is very dry;
• before frying frozen foods, remove any possible ice crystal;
• immerse the bucket (10) with food in oil for a short period
then extract it and, after a few seconds, re-immerse for
cooking.
USE