EN 14 Ranger
™
4000 Count Series
Reset
[
reset
]
Reset the Setup menu to factory defaults.
NO
= not reset
YES
= reset
Dual Scale [
d.scale
]
Set the status of the second scale input (Scale 2).
OFF
= disabled
ON
= enabled
Cap2 [
CAP2
]
Set the capacity of Scale 2.
1…9999
Grad2 [
GrAd2
]
Set the readability of Scale 2.
0.00005…0.5
Power on unit
[
pwWr.UN
]
Set the unit of measure displayed at startup.
AUTO
= last unit in use when turned off
kg
= kilograms
g
= grams
lb
= pounds
oz
= ounces
lb:oz
= pound ounces
Zero Range
[
ZErO
]
Set the percentage of scale capacity that may be zeroed.
2%
= zero up to 2 percent of capacity
10%
= zero up to 10 percent of capacity
Auto Opt [
A.OPt
]
Set the Automatic Optimization.
OFF
= disabled
ON
= APW automatically optimized
Auto Tare
[
A.tArE
]
Set the automatic tare functionality.
OFF
= Automatic Tare is disabled
ON
= the first stable gross weight is tared
ON-ACC = stable gross loads within the accept limits are tared (in Check weighing mode)
Beeper Opt [
bp.OPt
]
Set whether or not the beeper sounds when APW has been optimized.
OFF
= disabled
