OHAUS RC41M15-M, Инструкция по эксплуатации

Страница: 18 / 36

EN 16 Ranger
™
4000 Count Series
Filter [
FILtEr
]
Set the amount of signal filtering.
LOW = less stability, faster stabilization time
MED = normal stability, stabilization time
HI = greater stability, slower stabilization time
AZT [
AZt
]
Set the automatic zero tracking functionality.
OFF = disabled
0.5d = the display will maintain zero until a change of 0.5 divisions per second has
been exceeded.
1d = the display will maintain zero until a change of 1 divisions per second has been
exceeded.
3d = the display will maintain zero until a change of 3 divisions per second has been
exceeded.
Light [ LIGHt ]
Sets backlight functionality.
OFF = always off
ON = always on
AUTO = turns on when a button is pressed or the displayed weight changes.
Auto off [
A.OFF
]
Set the automatic shut off functionality.
OFF = disabled
1 = powers off after 1 minute of no activity
5 = powers off after 5 minute of no activity
10 = powers off after 10 minute of no activity
End Readout [
End
]
Advance to the next menu or return to the top of the current menu.
4.5 Unit Menu
This sub-menu activates units so they will be accessible with the Units button. The units in the
menu must be turned “on” to be active.
Note: Available units vary by model and local regulations.
4.6 Print1 Menu
Enter this menu to set printing parameters. Default settings are bold .
Note: The Print2 menu is only displayed if a second interface is installed.
Reset: no , yes
Stable Only: off , on
Auto Print: off , on stable, interval, continuous, accept
Content: P/N (-> off , on)
Result (-> off, on )
Gross (-> off , on)
Net (-> off , on)
Tare (-> off , on)
Header (-> off , on)
Footer (-> off , on)
Mode (-> off , on)
Unit (-> off, on )
Info (-> off , on)
APW (-> off , on)
Acc (-> off , result, all)
Layout: Format (-> S ,M)