RANGER
®
7000 SCALES
EN-51
5.9.13 Data Transfer
Output weighing results directly to a PC application.
Setup is easy and no additional software is
required.
Note:
Data Transfer Function is not supported in Windows
®
7. OHAUS provides SPDC software
for Windows 7 users. Please download from below link:
OFF
= do not print.
ON
= print the specified settings.
C
lick the Start Menu in Windows XP system and click “Settings” –>open
Control Panel
.
Double click
Accessibility Options
in Control Panel.
Select the
General
tab in
Accessibility Options.
Check
Use Serial Keys
, and click the
Settings
button.
Select the
Serial Port
, and set the
Baud rate
to
9600
.
After selecting, click
OK
to close setting for serial keys.
Close the Control Panel.
Run Excel
®
to open one blank sheet. Click on the cell where the data is to be placed.
At this time, if the scale sends data to the PC through the RS232 port, the data will be put into the
cell, and the cursor will automatically move to the next vertical cell.
Note:
If the weighing value is a negative number, set the target cell in TEXT format. Otherwise,
Excel will not distinguish it as a negative number.
