RANGER
®
7000 SCALES
EN-33
4.7.2
Average Time Setup
Press the button corresponding to the
icon to
enter the
Edit Average Time
screen
.
The
Edit Average Time
screen
is now displayed.
Enter the Average Time by using the
alphanumerical keypad and press the button
corresponding to the
icon
to change
save the value and return to the Application home
screen.
The default Average Time is 10 s.
Note:
When the time is set to 0, the first stable weight over
5d will be displayed.
Averaging time can be set to a value between 0 and
60.
4.7.3
Input/Output (I/O) Setup
The I/O’s can be customized for various user preferences.
The I/O’s are defined below
(defaults in
Bold).
Item
Available Settings
Discrete Input 1
Off,
Zero, Tare, Clear Tare, Print, Start, Reset, Accumulate
Discrete Input 2
Off,
Zero, Tare, Clear Tare, Print, Start, Reset, Accumulate
Discrete Output 1
Off,
Underload, Overload
Discrete Output 2
Off,
Underload, Overload
Discrete Output 3
Off,
Underload, Overload
Discrete Output 4
Off,
Underload, Overload
Note:
The I/O’s will only work when the I/O Option Board have been installed. See the Accessory list in section 9.4
for information.
The option I/O board provides two isolated inputs and four dry-contact normally open relay outputs
which can be used for simple process weighing.
Press the
button to enter the Main Menu.
With the button corresponding to the
icon, go down
the list and highlight
Application Mode
. Enter this sub-menu
by pressing the button corresponding to the
icon.
