EN-20
RANGER
®
7000 SCALES
4.3.2
Check Counting
Press the configuration button
and select Check Mode to Check Counting. Place objects on the pan. The
Under/Accept/Over
status is shown in the progress bar area while the actual number of pieces is shown on the
main Display Line.
The
CHECK
Home screen
Main Display Line
Reference Fields
Functions
Note:
Refer section 9.5, or press the button for button icon explanation.
Set the Average Piece Weight (APW)
Note:
It is recommended that the APW is larger than 1d. If APW
is between 0.05d and 1d, a warning screen will be displayed and
the information line will show ‘Low APW’. If APW is less than
0.05d an error screen will appear and the APW value cannot be
stored.
There are three ways to set the APW, see section 4.2.2 for
instructions.
Defining Over/Under Limits
Press the button corresponding to the
icon to enter
Limit Setup
.
Note:
See section 4.3.1 for information on how to set the
Over/Under limits.
4.3.3
Application Setup
The Application can be customized for various user preferences.
Press the button corresponding to the
icon to enter
Configuration Setup
.
