OHAUS Navigator Series, Руководство по обслуживанию

Страница: 9 / 52

CHAPTER 2 DIAGNOSTIC GUIDE
Navigator Series Service Manual 7 Ohaus Corporation www.ohaus.com
1.6 MENU STRUCTURE
Programmable features of the Navigator are contained in the User Menu and Service Menu which
are accessed through the Display Panel’s control switches. The menu structures are illustrated
below.
1.6.1 User Menu
The User Menu is easily accessed and documented for the scale operator. For more detail on
using the menu, see the Navigator Instruction Manual.
TABLE 1-5 NAVIGATOR USER MENU STRUCTURE
Sub-Menus: .C.a.l. .S.e.t.u.p.* .M.o.d.e. .U.n.i.t.* .E.n.d.
Menu Items:
Span
Lin
End
b.light
A-OFF
IR
Filter
AZT
Stab
Stab.C
End
Count
Percnt
Check
End
g
kg
…
End
* Note: Available settings vary by models and regions
**Availability of IR Sensor is dependent on model and region.
Press and hold Menu until
[
mMeNU
]
(Menu) is displayed. When released the first sub-menu
[
.C.a.l.
]
(Cal) will be shown.
Press Yes to enter the displayed sub-menu or press No to advance to the next.
Selecting a sub-menu will display the first menu item. Press Yes to view the menu item setting or
press No to move to the next menu item. When viewing the setting, press Yes to accept the setting,
or press No to change the setting. When
[
End
]
is displayed, press Yes to return to the sub-menu
selections or No to return to the first item in the current menu.
1.6.2 Cal Sub-Menu

Span
[
SpaN
]
(yes, no) - Initiates a span calibration procedure (zero and span). A span calibration
is important when initially setting up the balance.

Lin
[
Lin
]
(yes, no) - Initiates a linearity calibration procedure (zero, mid-point and span).
1.6.3 Setup Sub-Menu

Back Light
[
b.light
]
(on,off
,Auto
)-When Back light is set to "on" the balance will always "on".
When Back light is set to "Auto" the balance will turn on when a button is pressed or the
display weight changes.

Auto Off
[
A-Off
] (on, off)
-
When Auto Off is set to “on” the balance will turn off automatically
after 5 minutes of inactivity. Auto off is used to save battery power.

IR Sensor
[
Ir.Func
]
(Off, Tare, Function, Print, Zero,
Display)
- These settings determine the role
of the IR Sensor. “Zero”, “Print”, “Function” or “Tare” allows the IR sensor to act the same as
the related butto
n. “Display” activates the display if Display-Auto is set. “Off” disables the
sensor.*