OHAUS MB25, Руководство по обслуживанию

Страница: 14 / 48

CHAPTER 1 GETTING STARTED
Ohaus Corporation www.ohaus.com 1-6 MB23 and MB25 Service Manual
1.5.3 Operating Modes continued
If Time Duration is selected:
(Short or long press) Increases the value of the time setting.
(Short or long press) Decreases the value of the time setting.
(Short press) Accepts the blinking value and returns to Weigh mode.
(Short press) Exits Edit mode without saving changes.
Note : After 5 seconds of no activity the blinking setting is automatically saved and the
mode returns to Weigh mode.
Run Mode (Performing a Test)
A moisture determination test is initiated. The results in progress are displayed.
NOTE: To setup a test:
1. Place a container on the Pan, and press Tare .
2. Place mass to be tested (>0.5g) on Pan. Then press Start , as below.
(Short press) Activates Run mode, initiates test with sample greater than 0.5g.
Changes the unit of displayed result:
toggles between
weight (grams) -> % Moisture -> % Solids .
(Short press) Stops test in progress.
Sends current displayed value to the RS232.
Result Mode
At the end of the test (Run Mode), the display blinks the test result.
Changes the unit of displayed result: weight (grams) > % Moisture > % Solids.
Exits to Weigh mode.
Sends current displayed value to the RS232.